Blog

Busting Myths and Taking Names: Fujifilm, Spectra Logic and Iron Mountain Kick Off Series on Reintroducing Tape to the Modern Data Center

Reading Time: < 1 minute
Modern tape libraries are part of an overall data management lifecycle strategy that offer many benefits including lower cost, energy savings, increased security and long-term shelf life.
We’re excited to partner with Spectra Logic and Iron Mountain on this new Storage Switzerland eBook: Reintroducing Tape to the Modern Data Center. The first chapter debunks some of the common myths of tape storage around reliability, access and operations. Read more about it here.
Stay tuned over the next few weeks as we reveal the next four chapters covering topics such as disaster recovery and backup, performance, cost, and offsite storage.
Interested in learning more on this topic? Register for our webinar 5 Reasons Modern Data Centers Need Tape on September 26th at 11:00 am EDT.
Read More

When it Comes to Data Storage Spending, Knowing Your Total Cost of Ownership is Key

Reading Time: < 1 minute
Ever wonder if you are getting the best deal on your data storage? Understanding the total cost of ownership (TCO) is critically important to any data storage purchase decision.
Today we introduced our new TCO Calculator, an updated version of our online tool that helps IT professionals assess and compare TCO for automated tape storage, disk-based storage, and cloud-based archive storage. The new TCO Calculator raises the maximum user storage baseline from 10PB to 100PB, integrating the IBM TS4500 enterprise library using LTO-8 drives and media for initial capacities over 10PB. Amazon S3 Glacier Deep Archive and bulk retrieval service is now also included in cloud storage cost comparisons.
After entering data into the TCO Calculator, users can download a customizable results report which includes an executive summary, key cost assumptions, and TCO by cost category and type (e.g., energy costs, offsite costs, service fees, labor, bandwidth, etc.).
Find out how you can start saving on your data storage costs now. Access the free TCO Calculator here.
Read More

Do-it-Yourself Cartridge Repairs Anyone?

Reading Time: 2 minutes

By Brian Kelly

Have you ever watched a TV show featuring some dangerous activity and the warning comes up “Do not attempt this yourself?” It’s usually good advice and reminds me of an experience I had recently.

I had the pleasure of co-presenting at “The Reel Thing,” a part of the Association of Moving Image Archivists Conference in Portland, Oregon with Steve Kochak from Digital Preservations Laboratories. During my part of our presentation I was able to explain to the audience how an LTO cartridge is made and explained in detail each of the different components in a cartridge and what their functions are.

Steve then had a presentation set up to show how one can disassemble a cartridge and reattach a Leader Pin.  The audience was very excited and curious to see the inner workings of a cartridge and the reattachment of the Leader Pin. During the Q&A part of the presentation, after seeing Steve successfully disassemble and reassemble a cartridge and reattach a Leader Pin, the common theme in the questions being asked was, “can I repair my cartridges myself?”

While the answer in some cases is yes, especially with the correct tools, my advice for the audience was that we do not recommend repairing your cartridges yourselves and that we at FUJIFILM Recording Media U.S.A., Inc. accept returns from customers for analysis and repairs. Our technical support team in our U.S.-based factory just outside of Boston handles the cartridges with special care inside of a clean room environment to make sure that no debris comes into contact with the tape, especially in cases where the cartridge has to be opened. With Leader Pin reattachments, we put the cartridge back through the clamping process to make sure it is done properly. We take extra care of customer returns to ensure protection of the cartridges, as well as the customer data that may be saved on the tape. Performing these repairs yourself could lead to further damage and potentially the loss of data, especially if not done carefully or in the right environment.

So “don’t attempt this yourself” and risk losing your data. Leave your repairs to the professionals, we are more than happy to help!

Read More

The Tape Renaissance

Reading Time: < 1 minute

The magnetic tape data storage industry has withstood numerous challenges from its own past performance, from the HDD industry, and mainly from those who are simply uninformed about the major transformation the tape industry has delivered. Early experience with non-mainframe tape technologies were troublesome and turned many data centers away from using tape in favor of HDDs. Mainframe tape technology was more robust. Many data centers still perceive tape as mired in the world of legacy tape as a result. However, this view is completely out of date.

In this new white paper, Fred Moore, president of Horison Information Strategies, explains why it’s time to take advantage of the many benefits tape can bring to your storage infrastructure.

Read the white paper here.

Read More

Storage Switzerland Video: Considering the Total, Rather than Upfront, Cost of Backup Storage Infrastructure

Reading Time: < 1 minute

In a recent Storage Switzerland blog, Lead Analyst George Crump talks about how, because IT is perpetually working to lower both capital and operating expenses associated with backup storage infrastructure, backup workloads are common targets for migration to the cloud. However, this is not necessarily the most effective strategy for optimizing cost efficiencies.

In this video, he talks with IT consultant Brad Johns about why IT organizations should holistically evaluate the total cost of ownership (TCO) of their backup storage infrastructure, as opposed to focusing solely on immediate costs such as upfront infrastructure acquisition.

Check out George’s blog for more details:

Considering the Total, Rather than Upfront, Cost of Backup Storage Infrastructure

Read More

It’s Time to Wake up and Smell the Tape!

Reading Time: 2 minutes

By Rich Gadomski

I just spent a full day at a meeting of the Active Archive Alliance and as I was flying home it occurred to me that it’s time for data storage managers to rise up from the sleepy status quo of buying more disk arrays to address runaway data growth problems. It’s time to wake up and smell the sweet aroma of freshly made modern data tape (sort of like that new car smell if you don’t know).

Why do that you ask? Because best practices and undeniable facts say so. Consider the following:

Data goes through a lifecycle from hot to cold, that is to say from a period of active use to a period of inactivity. This can happen in as little as 30 days or less.

Inactive data should not stay on primary storage devices. It takes up space on expensive storage media, consumes more energy and adds to the backup burden.

What to do? Delete it? You probably can’t get permission to delete it, all data is now potentially valuable with new artificial intelligence (AI) and analytic tools emerging to derive value from that data. But you can move it and stop copying it!

Where do you move it to? Put it in an active archive consisting of low cost disk cache and even lower cost long term storage like a high density automated tape library. To store one petabyte of data for 10 years in a tape library will cost around $220,000 depending on your TCO variables. Alternatively, you could spend $900,000 on HDD and around $1,300,000 for cloud. Need more capacity? Tape libraries easily scale by adding more slots and tapes. You can export full tapes and plug new ones in. Move the full tapes offsite and get the benefit of air gap since the data is physically isolated from other networks. At least you know that data can’t be accessed and held for ransom.

Getting end user access requests for that data all of a sudden? Move it back to disk cache and serve it from there. When done, move it back to the tape library. Tape is super-fast, 360 MB a second and file access is made easier and faster with LTFS.

How to orchestrate all this? Intelligent data management solutions help move data automatically. Leverage metadata and AI tools to analyze files and move them off primary storage if they don’t belong there.

Does this sound like a tiered storage strategy? It is and it’s also known as an active archive. This is a best practice used by the biggest and most advanced data generating companies in the industry. If it works for them, it will work for you too.

There’s a lot of hype in the storage industry with lots of folks looking for new, better ways to do things. But some things are tried and true, like tape, with the benefits of constantly evolving capacities, performance, reliability and long term archivability. So wake up and smell the tape…put your data where it belongs and get on with your day!

Read More

How to Store a Zettabyte

Reading Time: < 1 minute

According to Aaron Ogus, partner development manager for Microsoft Azure Storage, storing a zettabyte of storage will be financially feasible in 2020. Data growth will always exceed expectations, and tape has a more credible road map and one that is easier to get to with not as much investment. Learn more in this video blog:

Read More

Taking Advantage of LTO-7 “Type M”

Reading Time: 3 minutes

Rich Gadomski
Vice President of Marketing
FUJIFILM Recording Media U.S.A., Inc

Sometimes change can lead to confusion, or at least to a lot of questions. Take changes in the tax laws for example. I won’t get into details, but suffice it to say I feel sorry for tax preparers come 2019!

In the realm of tape storage, we too have had some changes to the traditional roll-out of next-generation LTO tape drives and media. But rather than focus on confusing change, let’s focus on the luxury of having options. That’s exactly what we have in the option offered with the introduction of LTO-8 drives that can use standard LTO-8, LTO-7, or… LTO-7 Type M tape cartridges.

For the first time in the history of LTO technology dating back to 2000, users can now write to the previous generation tape cartridge at a higher density than previously allowed. Specifically, LTO gen 8 drive users can choose the option to write 9.0 TB native at 300 MB per second on a new/unused LTO-7 tape that previously maxed out at 6.0 TB native on LTO-7 drives. Assuming 2.5:1 data compression, 22.5 TB can be stored on a LTO-7 Type M cartridge with transfer speeds up to 750 MB per second. That’s a lot of capacity… and really fast!

Beyond extra capacity, LTO-7 Type M is a good option economically speaking, since there is no price difference between standard LTO-7 media already in the market and LTO-7 Type M media. This means LTO-7 Type M is 33% less on a cost per TB basis than LTO-7 and 45% less than LTO-8 media at current internet reseller prices.

Taking advantage of the LTO-7 Type M option is easy. First, make sure your tape library is equipped with LTO-8 drives and is upgraded to initialize LTO-7 Type M media for 9.0 TB capacity. If necessary, contact your library vendor to confirm this detail or to enable it. For your library to distinguish standard LTO-7 from Type M, you need to use “M8” designated barcode labels as opposed to “L7” designated barcode labels. To verify, you will see the characters“M8” printed to the right of the volser number on the barcode label where you would normally see “L7”.

Finally, like a good drug commercial, there are a few disclaimers to be aware of, but in this case the side-effects don’t sound worse than the disease known as: exponential data growth coupled with shrinking budgets. So here we go:

  • LTO-7 Type M can’t be initialized in standalone LTO-8 drives, library system required. But once initialized by the library, the Type M tape can be used in a standalone LTO-8 drive (read/write)
  • Once initialized for 9.0 TB, the Type M cartridge will not be compatible with LTO-7 drives
  • Type M cartidges will not be read/write compatible with LTO-9 drives

It’s always nice to have the luxury of options especially if that means be able to handle a lot more data at a super attractive price!

Read More

Why is Microsoft Azure Choosing Tape?

Reading Time: < 1 minute

Listen to Marvin McNett, Principal Developer Manager from Microsoft as he explains the reasons tape is being used today in the Microsoft data center for its archival storage tier. View the video here:

Read More

What is Redundant Arrays of Independent Tape (RAIT)?

Reading Time: < 1 minute

According to the Information Storage Industry Consortium, the total data rate for tape is improving by 22.5% MB/sec per year. One concept that is driving this capacity increase in the tape industry is RAIT (Redundant Arrays of Independent Tape). RAIT is ideal for large files that need massive amounts of throughput such as in a disaster recovery scenario where you need the ability to move your whole data center electronically to another location.

In this video, Fred Moore of Horison Information Strategies explains how RAIT works.

Read More

LET’S DISCUSS YOUR NEEDS

We can help you reduce cost, decrease vendor lock-in, and increase productivity of storage staff while ensuring accessibility and longevity of data.

Contact Us >